Ninja 650 Sport Pack

999941371

This large touring windscreen gives improved wind protection and comfort. It is 9cm higher and 4cm wider than original windshield and has a spoiler edge to direct airflow upwards.

999941373

12 Volt power socket kit with protective rubber cap.

017BRU0054

Developed in conjuction wih SP Connect the kit consists of a Clutch Mount, Anti-vibration module and a Universal Phone Clamp. Suits mosts mobile phones; Simply pull out the crown, screw it tight, and then push the crown back in to lock your phone in place. While remaining fully operable, your phone can now be attached to or detached from the mount in seconds.

999940937

Top Case (30L) Including Baseplate

999940799

Top Case (30L) Bracket for Ninja 650 & Z650

Kompletní titanový výfukový systém Akrapovič (Euro 5+)

Kompletní výfukový systém Akrapovič s katalyzátorem a titanovým tlumičem. Tento systém je o přibližně 2 kg lehčí než sériový výfukový systém a poskytuje čistý sportovní zvuk. Kombinace závodních materiálů, jako je titan pro vnější plášť tlumiče a koncovka z uhlíkových vláken, dodává tomuto výfukovému systému závodní nádech. Laserem vyznačené logo. Tento homologovaný výfukový systém splňuje předpisy EU a má typové schválení EC/ECE (Euro 5). (Euro 5)

999940800

Backrest pad adds passenger comfort with an integrated design that quickly and easily attaches to the 30 Liter Top Case.

999940805

Help protect your tank’s paint finish from scratches and ordinary wear and tear with this Knee Pad Set.

• Made with textured non-slip vinyl

999965026

Genuine Kawasaki chain kit containing engine Sprocket, washer, rear sprocket, nuts and cotter pin etc.
This complete package from Kawasaki contains all the qualified genuine parts required for correct drive chain replacement for popular models.
Compared to aftermarket kits, the genuine kits have the advantage of a rubber coated front sprocket, that will make the chain operation much more quiet. Somebody who has been running an aftermarket kit will know this difference.
The new chain kits have the recognizable green Kawasaki branded packaging.

999940797

Help protect your motorcycle from tip-over damage.

• High-density black ABS plastic Frame Sliders feature the Kawasaki logo and are mounted with factory-designed metal brackets
• Includes required brackets, hardware and installation instructions
• Frame Sliders help protect your motorcycle but will not prevent all types of damage

999941062

Made to tailor fit and complement the Z650 or Ninja 650 motorcycle, this seat enhances riding comfort for taller riders.

• The ERGO-FIT® extended reach seat is 30mm taller than stock and comes fully assembled
• Utilizes factory seat base and components for a factory fit
• PVC foam with vinyl cover , includes all parts needed to replace the stock seat
• Stylish carbon fiber pattern trim and embroidered Kawasaki logo

999940795

Stainless steel radiator trim with Kawasaki logo.

039PCU0031

Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celcius. Subtle branding. 100% Polyester. With multi usable (back)packing string bag.
Fits:

• Ninja 125
• Ninja 400
• Ninja 650
• Ninja 1000SX (without panniers)
• Ninja H2 SX/SE (without panniers)
• Ninja ZX-4R/RR
• Ninja ZX-6R
• Ninja ZX-10R/RR

178LOS0001

U-Lock 10x21cm from hardened steel with special security locking mechanism. Fits under the seat of your Z650/Ninja 650 with optional bracket. SRA approved.

999940802

Semi soft Nylon saddlebag set with reflective piping and Kawasaki logo.

• Inner net keeps luggage in place when the bag is opened
• Side pocket for small goods. Easy fitment on metal bracket with clip
• Waterproof inner bags are included
• L312mm, W213mm,H341mm (one side)
• Load weight max 3kg (one side)
• Load capacity approximate 14L (one side)
• Width of system is 815mm

999940801

Semi soft Nylon saddlebag set with reflective piping and Kawasaki logo.

• Inner net keeps luggage in place when the bag is opened
• Side pocket for small goods. Easy fitment on metal bracket with clip
• Waterproof inner bags are included
• L312mm, W213mm,H341mm (one side)
• Load weight max 3kg (one side)
• Load capacity approximate 14L (one side)
• Width of system is 815mm

039PCU0031A

Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celcius. Subtle branding. 100% Polyester. With multi usable (back)packing string bag.
Fits:

• Ninja 125
• Ninja 400
• Ninja 650
• Ninja 1000SX (without panniers)
• Ninja H2 SX/SE (without panniers)
• Ninja ZX-4R/RR
• Ninja ZX-6R
• Ninja ZX-10R/RR

999940985

For the 10x21cm U-Lock. Fits under the seat of your Ninja 650 / Z650.

999940803

Semi rigid Nylon tank bag specially designed for the fuel tank shape.
Black/Grey tank bag with reflective piping and Kawasaki logo.
Pocket with transparent plastic window at top of tank bag with hole for earphone.
Inside has partitions to prevent goods moving around.
Including shoulder belt and rain cover with transparent window.
L350mm, W223mm,H150mm
Load Weight Max 2kg
Load Capacity approximate 4 Litre.
A matching bracket is required for fitment.

999940932

Stylish wheel rim tape to complete the look of your bike. (Set of 4 rings for 1 bike)

999940933

Stylish wheel rim tape to complete the look of your bike. (Set of 4 rings for 1 bike)

999941018

Replaces the original oil filler cap.

201MAY0005

Whether you want to park your bike in a pitbox or in your garage, let your precious machine rest in style on this Kawasaki Garage Mat. The mat meets new FIM environmental codes and offers a high level of absorption and dust-control features.

• Size 100cm x 200cm
• Pile weight ± 300 gr/m²,
• Total height ± 5 mm,
• 30°C washable (no tumble-dry)

012BOY0013

Mounting points for paddock stand, providing stability during maintenance or storage. The bobbins are securely attached to the motorcycle's swingarm, allowing for easy and safe lifting of the bike.

999941229

Replaces the original Oil filler cap.

163JAY0020A

An essential tool for motorcycle enthusiasts and mechanics alike. Designed to provide stability and convenience, this paddock stand allows easy access to the wheels, suspension, and other components.

This premium rear bike stand can be disassembled, making transportation a lot easier. The compact bike stand comes in a shop worthy carrying case with a built-in carrying handle. The stand is made of premium steel and has a green and black finish. The Kawasaki logo is laser cut in steel.

Optional are the forks to suit your preference;

• The Y-forks are to be used in combination with bobbins. (163JAY0021)
• The L-forks can be used to support the rear swing arms. (163JAY0022)

999941106

CNC machined billet aluminium Oil Filler Cap with gold finish Note: Compatibility and availability of accessories may vary per specific model year, please check with your Kawasaki Dealer on availability and additional parts needed for installation